RPC-4850-24V DC Power Control Switch

RPC-4850-24V DC Power Control Switch

RPC-4850-24V DC Power Control Switch

Power Control & Management:

  • Remote Individual or Group Terminal Switching
  • On, Off, Reboot or Scheduled Terminal Switching
  • Terminal Sequencing & Power Up Delays
  • User-Defined Power-Up Default Status & Terminal Status Retention
  • Terminal Naming, Grouping & Access Control
  • Scheduled On, Off, Reboot Switching
  • Ping Watchdog with Auto Reboot
  • Diode Bridged A & B Power Inlets for Power Output Terminal Redundancy
  • IP & SNMP Control

Metering, Monitoring, Reporting:

  • Reports Temperature
  • Over-Temperature Alarms
  • Ping-No-Answer Alarm
  • Serial Port Invalid Access Lockout Alarm
  • Power Cycle Alarm
  • Alarm Inputs from Dry Contacts
  • No Dialtone Alarm
  • Alarm Notification via Email, SNMP, SYSLOG
  • Alarm, Command, Access Audit, Temperature Logging


  • In-Band (10/100Base-T Ethernet Port)
  • Out-of-Band (External Modem Ready)
  • Local (DB9 RS232 SetUp Port)
  • SSHv2 Encryption
  • Embedded Validated FIPS 140-2 Cryptographic Module
  • HTTPS/SSL/TLS Secure Web
  • Multi-Level Subscriber Directory with Terminal-Specific Password Protection
  • IP Address Filtering
  • Remote Authentication: LDAP/Kerberos/RADIUS/TACACS+
  • Supports Both IPv4 and IPv6

Network-grade Power Distribution:

  • 50 Amp Redundant DC In-Feeds
  • 2U Horizontal Mounting
  • 19" Rack Mounting Brackets
  • 1.2 kW Power Distribution


  • Dual +24V DC, Redundant 50 Amp Input Bus
  • Web Browser & SSH Access for Easy Setup and Operation
  • Encrypted Password Security
  • (2) Individual Circuits
  • (8) Switchable Circuits - 15 Amp Max per Terminal
  • On / Off / Reboot Switching
  • IP Addressed 10/100Base-T Interface
  • RS232 Console/Modem Port
  • IP Address Filtering
  • Boot/Sequence Delay
  • Automated Mode


  • Remote Power Management and Control
  • Reboot Servers, Routers, Switches, Web Cams, Firewalls and other Remote Devices.
  • Turn ON/OFF Any +24V DC Powered Device via Telnet, Modem, Web Browser or Local Terminal

unit management

  • Compatible with SNMP-based Enterprise Management Utilities
  • Includes WMU Enterprise Management Software
  • CLI and Web-Based GUI
  • SNMP Control, Monitoring and Configuration with Full MIB Support (Supports SNMP Versions 1, 2C and 3)
  • Multiple Concurrent SSH Sessions
  • SSL Web Browser

Input Alarm Notification & Power Control:

  • (4) Alarm inputs from Dry Contacts
  • Notification via Email, SNMP, SYSLOG
  • Power Control On/Off/Reboot

Green Features:

  • Scheduled On/Off/Reboot Power Switching
  • Cisco EnergyWise Compatible


Power Input/Output:
Voltage: +24V DC
DC Inputs: (2) Bus A & Bus B, Redundant 50 Amps Max. per Bus
Input Connectors: Terminal Block (2) #10 Screws
DC Outputs: Eight (8)
Output Connectors: Terminal Block (8) #8 Screws
Load: 15 Amps Maximum per Circuit (Total for Circuits 1 to 8 Not to Exceed 50 Amps)
Circuit Breakers: Eight (8) each. One per Outlet Circuit; 15 Amp, On/Off, Push/Pull Circuit Breakers
Network Interface:
Connector: 10/100Base-T, RJ45
Console/External Modem Port Interface:
Connector: DB9M, RS232C, DTE
Coding: Serial ASCII, 7/8 Bits, No Parity, 300 - 38.4K bps
LED Indicators: ON, RDY, RXD, Circuit ON (1-8)
Size: 3.5"H x 19"W x 9.5"D (2U)
(8.9 cm H x 48.3 cm W x 24.1 cm D)
Weight: 22 Lbs. (10 Kg) Shipping Weight
Operating Temperature: 32° to 122° F (0° C to 50° C)
Humidity: 10% to 90% RH
Agency Approvals:
Ordering Information:
RPC-4850-24V High Amp DC Network Power Switch

Price: $2,077.00